Spring Special | Krytox 105
- Dripper Bottle for easy application
One of the most common complaints about switches is the pinging noise caused by the springs. Krytox 105 solves that problem. Applying Krytox 105 to your switch springs greatly reduces the pinging noise and further refines the sound of your keyboard.
How Do I Apply Krytox 105?
There are 2 popular ways to lube your springs with lubrication oil:
- Bag Lubing
- Brush Lubing
Bag lubing is when the springs are put into a seal-able bag with a few drops of lubrication. Seal the bag and lightly shake it, making sure to coat the springs in the lubrication oil. This is a good short-term application as the lube tends to run off of the springs over time.
Brush lubing is the second option. Brush lubing is brushing the lubrication onto all surfaces of the spring. This can be very time consuming but will yield the best results as good technique will offer consistency and longevity.
Lubricant cannot be cleaned with soap and water and can be resistant to many solvents.
Although chemically stable and non-hazardous, wear gloves and place a protective layer on your working surface. Spills are difficult to clean, and the lubricant will transfer from an operators hands to any surface they may touch.
Please clean up any accidents with a microfibre cloth.
Omega Keys and any affiliated persons are not responsible for any damages which occur as a result of untrained or unsupervised use. This chemical is for industrial use only.